利用之前创建的内容
实际上,重新配置KNX设备会耗费大量时间.如有设备配置参数需重复使用,保持参数配置,便可在后续利用时节省大量人力和时间."我的产品模板"ETS App,可在收藏夹列表中添加已配置好的设备.KNX设备中所有(或几乎所有)项目均可用这种方式处理.制造商目录中的其他项目也可通过此方式预配置.此款ETS App帮助用户节省了大量重复操作,整合类似功能的时间.
心存疑虑时,不妨将ETS项目与安装进行比较,ETS项目是否为最新版？最不该发生的事情很可能会在现实中不幸发生.当因优化某特定功能而不得不对KNX项目进行修改时,我们总会疑虑重重.与其花时间推测和猜疑,不如使用"项目比较"ETS App.它可将安装设备与对应ETS项目可用数据进行对比.以此得知当前安装状态是否与预期ETS项目状态-致.设备配置不吻合的情况将会逐条显现,匹配结果也可作为第三方篡改数据的证据.
更换设备,保留配置！
使用KNX电气安装的好处之-是其高度灵活且能有效提高成本效益.因为它通常只涉及参数化.然而甚至连参数化也可以- 至少可以部分地–优化."替换产品"ETS App可在KNX设备替换的同时保留其参数设置.如当用八格致动器替换四格致动器时,前四个信道内的参数可自动替换.具备相同功能的设备均可实现数据自动替换,无论是否来自同-制造商.尤其当设备需要维修时,使用此ETS App可还原设备数据.
KNX设备的特点是其应用软件能为所有功能提供数据参数.还可在ETS上随时更改设备配置.然而系统整合商还需在这-设备领域多加探索挖掘.例如,在重建现有
时,可能发生总线组件意外暴露的情况.
KNX安装如遇此类情况,可用"设备读取器"ETS App读取设备内存,这将为问题分析提供必要的设备数据信息.
开发者网站
http://www.abb.com
版本信息
1
开发者网站
http://www.abb.com
版本信息
1
开发者网站
http://www.abb.com
版本信息
1
开发者网站
http://www.abb.com
版本信息
1
开发者网站
http://www.abb.com
版本信息
1
开发者网站
http://www.abb.com
版本信息
1
This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.
KNX Virtual is a Windows application representing a KNX installation, i.e. it is not a physical installation but it behaves like one.
The advantage is that no investment in hardware (i.e. KNX power supply, KNX/USB interface or KNX/IP interface, KNX devices) needs to be made in order to test and play with KNX & ETS.
Different version (types) of KNX Virtual exist, each version can be found within one zip file:
1. Switching (including staircase)
2. Switching (including staircase) + feedback
3. Dimming
4. Blinds
5. Heating (RTC)
About ETS:
- Download and install the latest version, no license is required because each KNX Virtual version contains maximum 5 devices (per project).
- Each KNX Virtual indicates the products that are required for the ETS project(s), you can retrieve them via the ETS catalog.
YouTube:
- part1: https://www.youtube.com/watch?v=k8zW0ZZNYA0
- part2: https://www.youtube.com/watch?v=R3FhiI5dTaI
eCampus
For KNX unexperienced users we recommend to follow an online training via our eCampus platform first.
开发者网站
http://www.knx.org
版本信息
KV-20231211
Device Configuration App (DCA) for Theben DALI-Gateway KNX plus
Order number: 9070929
Application: DALI-Gateway KNX plus (v2.0)
New features:
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)
This ETS-APP is a tool that allows updating the operating system of some KNX Zennio devices through ETS without having to send them to the factory.
The OS update does not involve a change of functionality or version of the ETS application program, but updates a lower memory layer.
These updates are usually not necessary throughout the lifetime of the product unless there is a behaviour that cannot be changed with a new version of the application program via ETS.
In case you need to use this APP, our support team will have provided you with the necessary files (.bin).
Download the App manual: https://www.zennio.com/download/manual_fw_updater_en
If you want to update the ETS application program version, you can copy parameters and object links using the Zennio Parameter Copier application, also available in the KNX online shop.
Device Configuration App (DCA) for theben DALI-Gateway S64/S128 KNX
Order number: 4940301, 4940302
Application: DALI-Gateway S64 KNX, DALI-Gateway S128 KNX
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)
Theben DALI-Gateway S64 KNX, Theben DALI-Gateway S128 KNX
Order no.: 4940301, 4940302
Application: DALI-Gateway S64 KNX V2, DALI-Gateway S128 KNX V2
Device Configuration App (DCA) for the DALI configuration.
The DCA is used for addressing and grouping, as well as creating scenes and timers.
This DCA is compatible with the above application (V2) and devices with firmware 0.3x.
Theben DALI-Gateway P64 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX
Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.
施耐德电气的“eConfigure KNX”是一款用于 KNX 项目的图形配置 ETS App。该工具适用于住宅项目和中小型建筑项目。您可以直接通过拖放传感器和负载到建筑的平面图并轻松连接它们，从而设计完整的 KNX 项目。执行器会自动生成，并链接到建筑物各层的负载。
请查找产品目录：https://www.se.com/ww/en/product/LSS900100/knx-graphical-software-econfigure-knx-lite-for-250-knx-devices/
注意：需要 ETS6 Professional。